Paver sealing for San Marco homes
Paver Sealing in San Marco, FL
San Marco yards with brick and concrete pavers can need two sealers, so call (904) 849-6284 for a free estimate.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Fast, careful paver sealing in San Marco
Paver sealing in San Marco comes with a free estimate, from the blocks around the Square to the streets near the St. Johns River. A local contractor cleans, re-sands and seals driveways, courtyards and walks. Once you ask for your free estimate, expect an answer in 1 business day, usually much sooner.
Picture a front walk where the sand has thinned, the color has dulled and brown streaks run under the trees. After a gentle wash, fresh sand and a coat chosen for the surface, the same walk looks even and tidy again. Prefer to talk first? Call (904) 849-6284 and describe what you see.
Why hire a local paver sealing contractor in San Marco?
San Marco owners often hire a local paver contractor because one yard can hold old clay brick, newer concrete pavers and a driveway that floods. To hear how that would be handled at your house, ask for your free estimate.
A free look at each surface
The contractor checks brick, concrete and stone at your San Marco property at no charge. You see a price before any work is agreed.
A range to compare
First Coast companies commonly publish $1.75 to $3.25 per square foot to clean, sand and seal. Hold any San Marco quote up to it.
A sealer matched to the surface
Old clay brick and concrete pavers do not take the same product. Ask which one goes where, and why.
No pressure to commit
You choose the date, the finish and whether to proceed. A San Marco estimate carries no obligation.
Get Your Free Estimate in San Marco
Tell us about your pavers in San Marco.
Free, no obligation
What paver problems show up most in San Marco?
Brick and concrete that need different sealers
A Northeast Florida paver company says old clay brick is usually sealed with a silane or siloxane product. That kind keeps water out and leaves the look alone. Concrete pavers can take a film-forming acrylic. A yard with both needs two products. A film sealer on old brick can trap moisture and cause flaking and haze. That is why a mixed yard needs a look before anyone opens a can, and why a test patch helps you see the result first.
Water at the curb in low blocks
The St. Johns River rose to a historic 5.57 feet on September 11, 2017, and homes in San Marco flooded. The city said in October 2026 that the LaSalle Street pump station was complete. Officials still say heavy rain falling quickly can overwhelm it. Pavers that sit in water need washing and fresh sand, and the sealer waits. A 2025 resident said wakes from passing drivers push water into yards, especially at high tide. Even a calm day can leave a wet edge.
A coat sealed over damp or dirty pavers
A brick maker's FAQ warns that sealant should never go over damp or dirty surfaces or efflorescence, because those conditions get locked in permanently. Efflorescence is the chalky white bloom that rises to the surface. Most sealer that turns white, one Jacksonville company says, went on damp pavers. A dry, clean surface comes first, which means a rushed job on a damp morning is the one to turn down. Ask the contractor how long the pavers will be left to dry, and whether the forecast was checked. A short wait now beats a stripped coat later.
Brown streaks and green film under the trees
Anything under a live-oak canopy gets brown water stains on drives and walks, Safe Touch says. San Marco has fourteen parks, with magnolias and oaks at Landon Park and live oaks along River Road. Moss and algae need heavy shade to take hold on pavers, and tannin stains can soak in over time if the surface stays unsealed. If your walk sits under that cover, expect the stains to return unless sealer is on. Davin Park on River Road has live oaks planted in 1985. Mature trees give a street that much cover, and drop that much leaf fall on a walk.
A coat from an owner long gone
The median build year in Alexandria Place, a subdivision in the San Marco area, is 1939. A house that old has likely seen several owners, and any pavers added since probably carry more than one coat. Sealer left from an earlier job that is white, hazy or flaking has to be stripped first, says a Jacksonville cost guide. Water-based sealer also cannot go over solvent-based sealer, so the first visit includes finding out what is already there. A small test spot can show how the old coat reacts.
Do San Marco homes near the river need different paver care than homes near the Square?
Often they do, because the two areas face different problems. Near River Road, one 2017 account put the Irma high-water mark at about 5 feet on a home. Near San Marco Square, where Atlantic Boulevard, Hendricks Avenue and San Marco Boulevard meet, courtyards tend to be tight. Name which side you are on when you ask for your free estimate.
San Marco covers more ground than the Square. The old Red Bank plantation became South Riverside and Colonial Manor, annexed in 1937. The Acosta Bridge in 1921 brought Alexandria Place and River Oaks. Homes from so many decades mean pavers of many ages, so call (904) 849-6284 and name your street.
If your property is in a historic district or is a landmark, Jacksonville requires a Certificate of Appropriateness for exterior work. Driveways are named as an example. The San Marco Preservation Society formed in 1975 to preserve the area's character. The city lets you look up an address on its Land Development Map, so check it, then ask for your free estimate.
What does paver sealing cost in San Marco?
Companies around the First Coast commonly publish $1.75 to $3.25 per square foot to clean, sand and seal pavers, quoted after the joints are inspected. A Northeast Florida company says prep such as mildew removal, rust treatment or stripping old film moves the price more than the sealer does. To get a number for your pavers, ask for your free estimate.
Mixed surfaces can add to a San Marco total. A yard with both brick and concrete needs two products, and tight side yards and gates add prep time, a Jacksonville guide says. Per square foot, smaller jobs cost more too. A call to (904) 849-6284 lets the contractor say which of those fit your property.
| Paved area | Typical example | Clean, sand and seal |
|---|---|---|
| 300 sq ft | Small patio or walkway | $525 to $975 |
| 600 sq ft | Two car driveway | $1,050 to $1,950 |
| 1,000 sq ft | Large driveway or pool deck | $1,750 to $3,250 |
| 1,500 sq ft | Driveway plus pool deck | $2,625 to $4,875 |
Math based on the $1.75 to $3.25 per square foot that Northeast Florida paver companies published as of November 2026. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.
How does a paver sealing job work in San Marco?
Sort the surfaces and test a patch
The contractor first sorts brick from concrete from stone, since each takes different sealer chemistry. A test patch lets you see how a product changes the color before the whole job is sealed. Sunken or lifted sections are reset first. The old coat is identified so the new one can sit on it safely. If you know who sealed the pavers last, share that name and date.
Wash gently, never with a blast
A trade supplier cautions that pressure above 3,000 PSI on standard concrete pavers can strip the surface. Older brick is more porous still. Washing clears tannin stains, green film and dirt in the joints. Deep stains may not lift fully, and the contractor should tell you that before sealing. Rinse water is kept off siding and painted trim where the pavers meet the house.
Refill the joints
Washing and summer storms both pull sand out, so the joints are refilled before sealing. Safe Touch says sand lost to summer storms must be restored first. Full joints keep dirt and weeds out, and they hold the pavers in place when the next downpour comes. The surface is then swept clean.
Let everything dry out
Sealant should never go over damp or dirty surfaces or efflorescence, a brick maker warns. Bedding sand under pavers can stay damp after rain, and low blocks near the river dry slowest. A careful contractor books the job for a clear stretch of days. That patience is what prevents a cloudy coat, which can only be fixed by stripping it off.
Apply the right product to each surface
Sealer is sprayed and back-rolled on concrete pavers, with a penetrating product where brick calls for one. Expect a new coat every two to five years, the range companies tend to quote. A matte finish keeps scuffs hidden longer than a wet look. One company in town says people can walk on it within hours, while cars need about a day. Rain in the first day can mark a fresh coat, so ask about the forecast.
Complete paver services in San Marco
A San Marco job runs in a set order: sort the surfaces, wash, re-sand, dry and seal. The sealer goes on last so nothing dirty is locked under it. Brick and concrete can be handled in the same visit with different products, so mixed surfaces add planning, not guesswork. To ask how that would work at your house, call (904) 849-6284.
Front walks and courtyards are what the neighbors see, so the finish matters here. Driveways take tires and street runoff, shaded entries stay damp, and pool decks need a slip-aware finish. A courtyard can be hard to reach with equipment, so mention access when you ask for your free estimate.
Sealer choice starts with the surface. Film-forming acrylics sit on top and hold joint sand, while silane or siloxane products soak in and leave the look alone. Water-based sealer cannot go over solvent-based sealer. Call (904) 849-6284 to talk through which type suits your pavers.
Timing follows the weather and the water. Rain is heaviest from May to September, and low blocks can stay wet after a storm. New pavers should wait about 30 to 60 days before a first coat, a Jacksonville company advises. To find a date that suits your street, ask for your free estimate.
Questions to ask before you hire
- What should I move off the driveway and patio before you arrive?
- What will your estimate list, line by line, so I can compare it with other quotes?
- How far out are you booking right now?
- Is your liability insurance current, and may I call the insurer to confirm it?
- Do you wash with hot water or cold water, and how much pressure do you use on pavers?
- How long should pavers that went in last year wait before they are sealed?
- Can you get the white, chalky bloom off my pavers before you seal them?
What do sealed pavers look like around San Marco?
Why local matters in San Marco
A contractor who works San Marco expects mixed surfaces and asks about them early. Old brick, concrete pavers and stone often share one property here. Getting the sealer wrong on one of them can cause flaking or haze. To talk with a contractor who works around the Square and River Road, call (904) 849-6284.
Local work also means respecting the water. San Marco residents have dealt with flooding for generations, and the LaSalle Street pump station was built to send water back to the river. Its builder said it would not stop every flood. You can ask for your free estimate and ask how a lot that took on water would be handled.
San Marco is also a neighborhood people look after. The Preservation Society has worked since 1975 to keep its historic and architectural character. A contractor who knows that will protect walls and trim and keep a finish in good taste. If you have a question about a specific house, ask for your free estimate and describe it.
What is the story behind San Marco's streets and Square?
San Marco broke ground in 1925 on 80 acres of the old Villa Alexandria estate, and its 250 lots sold within three hours. San Marco Square was laid out by late 1926, inspired by the Piazza San Marco in Venice. The San Marco Building of 1927 and the art deco San Marco Theatre of 1938 followed. If your home is near the Square, ask for your free estimate and name your street.
Lake Marco began as a clay pit for the Gamble and Stockton Brick Company, and the brickyard moved in September 1925. South Jacksonville joined Jacksonville in 1932, and the Acosta Bridge had opened in 1921. Parks such as Landon, Belmonte and Largo Well still carry the old oaks and magnolias. Near any of them, call (904) 849-6284.
Frequently Asked Questions
Why is paver sealing so expensive in San Marco?
Prep is most of the price. A Northeast Florida company says mildew removal, rust treatment and stripping old film affect the price more than the sealer does. Smaller jobs cost more per square foot, and brick plus concrete can mean two products. Ask for a quote that lists each step, the square footage and the product for each surface, so two bids can be compared line by line.
Which water-based paver sealer is right for San Marco brick?
Old clay brick usually does better with a breathable penetrating sealer, a Northeast Florida company says, because a film sealer can trap moisture. A solvent-based coat that is already down also blocks a water-based sealer. Ask for the product name and ask for a test patch first. A patch in a corner shows how the color changes, and that is cheap insurance before the whole job.
How long does paver sealing last in San Marco?
Budget for a new coat every two to five years, the span companies tend to quote. Driveways and sunny spots wear toward the short end. When water stops beading and soaks in fast, a Jacksonville company says it is time for a fresh coat.
How much does it cost to re-sand and seal pavers in San Marco?
Companies often post $1.75 to $3.25 per square foot for a full clean, sand and seal. Stripping and resealing costs more if the old coat has failed. A yard with brick and concrete may need two products, which can change the total.
Can one sealer cover both brick and concrete in San Marco?
Usually not. A Northeast Florida company says a yard with both brick and concrete pavers needs two products. Brick and natural stone are more porous and need different chemistry, a Jacksonville guide adds. A contractor should name what goes on each surface, and write it into the estimate so nothing is guessed on the day.
Do I need city approval to seal pavers in San Marco?
It depends on your address. The city requires a Certificate of Appropriateness for exterior work on landmarks and in historic districts, and driveways are listed. The city page does not mention sealing, so look up your address and ask city staff if you are unsure.
Can my San Marco pavers be sealed after a flood?
Yes, once the pavers are washed and fully dried out. Sealant should never go over damp or dirty surfaces or efflorescence, a brick maker warns. After flood water, pavers need a wash and fresh joint sand before any coat.
How long should I wait to park on a sealed San Marco driveway?
Feet are fine after a few hours, but cars should stay off for about a day. Another local company says 2 to 4 hours for feet and 24 hours for cars. Ask the contractor for the plan for your sealer and the weather.
What should I move before a paver sealing crew arrives in San Marco?
Move cars, planters and furniture off the pavers, and clear toys and tools from the area. A paver company in the San Marco local pack says it protects pool filters, drains and driveways during the work. Ask what the contractor will cover and what you should remove.
Is it good to seal pavers in San Marco?
For most owners it is, since sealer keeps oil, grease and dirt sitting on top instead of soaking in. Safe Touch says sealer also keeps the next season from locking a stain in under live oaks. The catch is the right product on the right surface.
Nearby areas we serve
Ready for a Free Estimate in San Marco?
Call (904) 849-6284 and tell us about your pavers.
Free, no obligation